FTTH Fiber Optic Patch Cable SC/APC to SC/APC, 15 m, Single-Mode 9/125 G.657A1, Yellow
View installment plans

















Installment Calculator
Final terms are confirmed at checkout.
Couldn't load pickup availability
FTTH Fiber Optic Patch Cable — SC/APC to SC/APC, 15 m, Single-Mode 9/125
A 15 m yellow fibre lead for home fibre (FTTH) lines. It joins the fibre termination box on the wall to the fibre port of your router or ONT, so the router can sit in the middle of the home, where its Wi-Fi reaches every room, instead of next to the point where the line comes in.
What It Does Well

A Green SC/APC Plug at Each End
Both ends carry the same green SC/APC plug, so the cable works either way round. Green marks the angled APC polish used on home fibre lines. The single-mode 9/125 fibre inside follows G.657A1, a standard made to tolerate tighter bends than ordinary single-mode fibre, which helps when the cable runs along skirting boards and around door frames.

Pushes Straight Into the Router's Fibre Port
The SC plug is a push-pull connector: line it up with the green FIBER port of the router or ONT and push until it clicks, then pull on the plug body, never the cable, to remove it. The port is separate from the LAN and WAN Ethernet sockets beside it, so check that your device has an SC/APC fibre input before you buy.
Verified Specifications
| Brand | No brand |
| Type | FTTH fibre optic patch cable |
| Connectors | SC/APC to SC/APC (green), with protective caps |
| Fibre | Single-mode 9/125 µm |
| Fibre standard | G.657A1 (bend-insensitive) |
| Length | 15 m |
| Cable | Single yellow cable |
| Use | Fibre wall box to router or fibre terminal (ONT) |
| Speed rating (seller) | Up to 10 Gbps |
