Antec Flux Pro Full Tower E-ATX Case 6 Fan Black
Installment Calculator
Final terms are confirmed at checkout.
Couldn't load pickup availability
Antec FLUX PRO Black Full Tower E-ATX Case with 6 PWM Fans and Temperature Display
Antec's Flow Luxury full tower: six PWM fans pre-installed, air pulled in through the power supply chamber to feed the graphics card, a built-in CPU/GPU temperature display and a walnut wood and mesh front.
What It Does Well
Built-In CPU/GPU Temperature Display
The panel on the power supply chamber shows CPU and GPU temperatures, with four modes (both, CPU only, GPU only, off). It reads the sensors through Antec iUnity software, which must be installed.
Six PWM Fans in the Box
Three 140 mm Tranquil PWM fans in front, two 120 mm P12R reverse fans on the PSU shroud blowing up at the graphics card, and a 140 mm Tranquil fan at the rear. A built-in ARGB & PWM hub runs them from one motherboard header.
Reverse Fans Under the Graphics Card
Two 120 mm P12R reverse fans sit in the power supply shroud and blow straight up at the graphics card, fed by the vents in the PSU chamber. The temperature display sits in front of them.
Room Behind the Tray
Behind the motherboard tray sit the modular drive cages (four 3.5"/2.5" plus two 2.5" bays) and the cable routing, with cable ties and Velcro straps included. The power supply can also be turned 90° with the included extension cable.
Verified Specifications
| Brand | Antec |
| Model | FLUX PRO Black |
| Form Factor | Full Tower |
| Dimensions (D × W × H) | 530 × 245 × 545 mm |
| Materials | Steel, plastic, 4 mm tempered glass, walnut wood |
| Motherboard Support | E-ATX (≤ 285 mm), ATX, Micro-ATX, ITX |
| Expansion Slots | 8 |
| Front I/O | Power, Reset, 2 × USB 3.0, 1 × USB Type-C 10 Gbps, headphone/mic combo, temp display switch |
| Included Fans | 3 × 140 mm Tranquil PWM (front), 2 × 120 mm P12R PWM reverse (PSU shroud), 1 × 140 mm Tranquil PWM (rear) |
| Fan Hub | Built-in ARGB & PWM hub, synced with the motherboard |
| Fan Support | Front 3 × 120/140 mm · Top 3 × 120/140 mm · Shroud 3 × 120 mm · Bottom 2 × 120/140 mm · Rear 1 × 120/140 mm |
| Radiator Support | Front and top up to 420 mm (420 + 360 together) · Shroud up to 360 mm · Bottom 240 mm · Rear 140 mm |
| Max GPU Length | 455 mm |
| Max CPU Cooler Height | 190 mm |
| Max PSU Length | 180 mm side mount; up to 300 mm with HDD cage, 470 mm without (incl. cables) |
| Drive Bays | 4 × 3.5"/2.5" + 2 × 2.5" |
| Dust Filter | Full-size pull-out bottom filter |
| Weight | 13.6 kg net |
| Manufacturer Warranty | 2 years |
