RAM CORSAIR/CMK64GX5M2D6000Z40/VENGEANCE DDR5 64GB (2 x 32GB)
Installment Calculator
Final terms are confirmed at checkout.
Couldn't load pickup availability
CORSAIR VENGEANCE DDR5 64GB (2 × 32GB) 6000 MT/s CL40
A two-module, 64GB DDR5 desktop kit that Corsair tests at 6000 MT/s, CL40 and 1.35V, with both AMD EXPO and Intel XMP profiles so one BIOS setting applies it. Each module wears a solid aluminium heat spreader in grey, stands 35 mm tall and carries its own overclock-ready power management IC.
One Setting to 6000 MT/s
Corsair lists the kit for AMD 600 and 800 Series and Intel 600, 700 and 800 Series boards. Out of the box it starts at the JEDEC 4800 MT/s SPD; enable EXPO on Ryzen or XMP on Intel and it runs at the tested 6000 MT/s CL40.
64GB Across Two Modules
Two 32GB modules fill both memory channels of a desktop board with one module per channel, leaving room for large video timelines, 3D scenes, virtual machines and many browser tabs open at once.
Design & Engineering
A Matched 2 × 32GB Kit
The kit ships as two identical 32GB modules. Corsair says it builds VENGEANCE DDR5 from hand-sorted, tightly screened memory chips on a high-performance PCB for consistent behaviour at high frequency, and the pair is tested together at 6000 MT/s CL40.
Solid Aluminium Heat Spreader, 35 mm Tall
Corsair's close-up marks the module at 35 mm. The solid aluminium spreader with its triangular vent pattern draws heat away from the chips, and the low profile helps the kit fit under most CPU coolers. Check your cooler's RAM clearance before buying.
Grey VENGEANCE Finish, No RGB
Straight on, the module shows its brushed VENGEANCE nameplate and DDR5 marking on a grey spreader. There is no lighting bar on this kit, so there is nothing to sync or power. The 288-pin edge has the DDR5 key notch, so it only fits DDR5 desktop slots.
Built for Overclocked DDR5
Shown installed beside a liquid-cooler pump: each module has an overclock PMIC that regulates its own voltage on the module, adjustable in Corsair iCUE. Speed depends on your CPU and motherboard, and the tested 6000 MT/s needs the EXPO or XMP profile enabled in the BIOS.
Theoretical Peak Bandwidth per Module
Hardware Synergy & PC Building
Verified Compatibility with CPUs, Motherboards & Coolers
Compatible Motherboards
Full XMP & EXPO support on modern chipsets
Ryzen & Intel Processors
AMD 600 / 800 and Intel 600 / 700 / 800 Series boards
35 mm Module Height
Check your cooler's RAM clearance against 35 mm
Stable Clean Power
Precision voltage delivery for onboard DRAM PMIC
Comprehensive Silicon Specifications
| Product Line | CORSAIR VENGEANCE DDR5 |
| Part Number | CMK64GX5M2D6000Z40 |
| Capacity | 64GB kit (2 × 32GB) |
| Memory Type / Format | DDR5 UDIMM, 288-pin (desktop) |
| Tested Speed | 6000 MT/s (PC5-48000) |
| Tested Latency | CL40 |
| Tested Voltage | 1.35V |
| SPD (default) | 4800 MT/s · CL40 · 1.1V |
| Performance Profiles | AMD EXPO and Intel XMP |
| Power Management | Overclock PMIC on each module (iCUE voltage control) |
| Heat Spreader | Solid aluminium, grey |
| Module Height | 35 mm |
| Lighting | None |
| Compatibility | AMD 600 / 800 Series; Intel 600 / 700 / 800 Series |
| Manufacturer Warranty | Corsair Limited Lifetime Warranty |
Frequently Asked Questions & Store Policies
Will it run at 6000 MT/s as soon as I install it?
Does it work on both AMD and Intel?
Will it fit under my CPU cooler?
Does this kit have RGB lighting?
Should I add a second kit later to reach 128GB?
What warranty coverage is included with this RAM module?
What payment and installment plans are available in Egypt?
How fast is shipping and delivery across Egypt?
Can AHW Store assemble and stress-test my complete custom PC with this RAM?
What is the return and compatibility exchange policy?
Shop the range: DDR5 RAM
